Are You Ready for Grilling Season? Order Your Accessories and Parts Now!
Guide to AKORN® Auto-Kamado™ Error Codes

Guide to AKORN® Auto-Kamado Error Codes

If you receive an error code on you AKORN® Auto-Kamado, no need to panic. This guide and your manual are great resources to walk you through how to clear the code. If the following steps do not work, please reach out to our team at AutoKamado@chargriller.com for more assistance. 

Code ErP

  • Check the connection of the main heat sensor. Unplug the connection, check the pins to make sure no pins are bent, and then reconnect.
  • Clean the sensor with a cloth if excessively dirty.
  • If error code persists, you may need to replace your heat sensor. Contact our team at AutoKamado@chargriller.com for more assistance.

Code ErH

  • Grill temperature has exceeded 750F.
  • Unplug grill and open the lid to cool down.
  • Check for cause of the overheat: fan malfunction or grease fire.
  • Plug grill back in to clear message.
  • If error code persists, contact out team at AutoKamado@chargriller.com for more assistance.

Code ErF

  • Check the connection of the fan. Unplug the fan connector and the power connector.
  • Check the fan and wiring for any damage. If the fan is damaged, contact our team at AutoKamado@chargriller.com. You may need to replace the fan.
  • If the fan is not damaged, plug the connection and the power connector back in. Power on the grill to reset the error code.
  • If the error code returns, you may need to replace your controller. Contact our team at AutoKamado@chargriller.com for more assistance.

Code ErU

  • Incorrect voltage detected if using the wrong power adapter. Check if using the supplied power adapter or for malfunction of power adapter.
  • If error code persists, you may need to replace your power supply. Contact our team at AutoKamado@chargriller.com for more assistance.